Save to favorites
Add to compare
Wide fields interior acrylic water-dispersion paint, White, 7 kg
Interior acrylic water-dispersion paint for decorative finishing of walls and ceilings in general-purpose indoor rooms.
Specifications
- Color:
- White
- Washability class:
- 3
- Gloss level:
- Deep matte, 2
- Fungicidal protection:
- Application area:
- Indoors
- Safety:
- Safe
- Packaging:
- 7 kg
- Durability:
- Aesthetic and mechanically resistant
- Thinner:
- Water
- Hiding power class:
- 3
- Application temperature:
- +5°C ... +35°C
Choose a variant
4 available
Wide Fields interior acrylic water-dispersion paint is intended for decorative painting of walls and ceilings inside general-purpose rooms.
The paint is used on prepared traditional building substrates, including concrete and brick, and for painting wallpaper on cellulose-paper and fiberglass bases.
The coating has a deep matte appearance, vapor permeability, washability class 3, and hiding power class 3. This combination suits interior surfaces where an even white finish without excessive gloss is needed.
Before application, clean the substrate from dust, dirt, unstable coatings, and poorly bonded particles. The surface should be dry, strong, and level; prepare it according to the condition of the material if needed.
Mix the paint until homogeneous and apply it at temperatures from +5°C to +35°C. If needed, thin the product with water according to the manufacturer’s recommendations.
- forms a deep matte coating for interior walls and ceilings;
- suitable for general-purpose rooms;
- can be used on concrete, brick, and prepared mineral substrates;
- suitable for painting wallpaper on cellulose-paper and fiberglass bases;
- has washability class 3, hiding power class 3, and fungicidal protection;
- thins with water and is available in pack sizes for different amounts of work.
- walls and ceilings indoors;
- general-purpose rooms in residential and public spaces;
- corridors, auxiliary rooms, and other interior areas;
- prepared concrete and brick surfaces;
- traditional mineral substrates after proper preparation;
- wallpaper on cellulose-paper or fiberglass bases.
- 1.4 kg is convenient for a small area, repair, or trial painting;
- 4.2 kg suits a single wall, ceiling, or small room;
- 7 kg is useful for several surfaces or a medium amount of work;
- 14 kg is suitable for larger rooms or a series of rooms;
- all variants are white, so check whether you need a ready white finish or further tinting;
- for surfaces with moderate cleaning, use washability class 3 as the key reference.
- prepare a dry, strong, and level substrate without dust, dirt, or unstable coatings;
- on wallpaper, check adhesion strength and make sure there are no peeling areas;
- make sure the application temperature is within +5°C ... +35°C;
- mix the paint until homogeneous before use;
- thin with water if needed according to the manufacturer’s recommendations;
- apply evenly, considering the substrate condition and the desired finish appearance.
What is it suitable for?
Interior acrylic water-dispersion paint for decorative finishing of walls and ceilings in general-purpose indoor rooms.When is it not suitable?
Do not apply over dust, grease, moisture, chalky or weak coatings; difficult substrates need primer or a test area.What is the consumption or yield?
No separate consumption value is listed, so estimate from area, joint size, or recommendations for the specific application method.How long does the layer dry or form?
Let the layer fully form before loading. For difficult conditions, make a test area and check the instructions.What are the common mistakes?
Painting a weak base without primer, applying too thick a layer, wrong application temperature, and rushing between coats.