Save to favorites
Add to compare
Open meadows 1:4 primer concentrate
1:4 acrylic primer concentrate for preparing surfaces before painting indoors and outdoors.
Specifications
- Fungicidal protection:
- Application area:
- Outdoors and indoors
- Safety:
- Safe
- Thinner:
- Water
- Application temperature:
- +5°C ... +35°C
Choose a variant
3 available
Open meadows 1:4 primer concentrate is used to prepare surfaces before painting work. The product helps improve paint adhesion to the substrate and prepare porous areas for even application of the finish coating.
The concentrate is diluted with clean water at a 1:4 ratio. The ready working solution can be used outdoors and indoors at temperatures from +5°C to +35°C.
The product specifications state water as the thinner, fungicidal protection, the property “safe”, and transparency after drying. This is useful when the substrate needs preparation without changing its visible color after the layer dries.
The 1 l pack suits local work and small areas, 2 l is convenient for medium volumes, and 5 l suits a larger area or regular surface preparation before painting.
Before application, clean the substrate from dust, dirt, grease, old coating residue, and poorly bonded particles. After dilution, apply the primer evenly by brush, roller, paintbrush, or spraying according to work conditions.
- the concentrate is diluted with water at a 1:4 ratio;
- helps prepare the substrate before paint application;
- suitable for interior and exterior work;
- has fungicidal protection stated in the specifications;
- remains transparent after drying;
- available in 1 l, 2 l, and 5 l packs.
- surface preparation before painting;
- porous substrates before applying the finish layer;
- walls and ceilings indoors;
- outdoor substrates under suitable work conditions;
- areas where substrate absorption needs to be evened out;
- jobs where layer transparency after drying is important.
- 1 l is convenient for local repair or a small area;
- 2 l suits a medium amount of work in a room or on a separate area;
- 5 l is better for a larger area or several preparation stages;
- all variants are transparent after drying;
- for outdoor and indoor work, use the application temperature of +5°C ... +35°C as a reference;
- when preparing the working solution, account for the 1:4 dilution with water.
- clean the substrate from dust, dirt, grease, old coating residue, and unstable particles;
- dilute the concentrate with clean water at a 1:4 ratio;
- mix the working solution until homogeneous;
- apply by brush, roller, paintbrush, or spraying;
- work at substrate and ambient temperatures from +5°C to +35°C;
- after application, let the layer dry before further painting.
What is it suitable for?
1:4 acrylic primer concentrate for preparing surfaces before painting indoors and outdoors.When is it not suitable?
Do not apply over dust, grease, moisture, chalky or weak coatings; difficult substrates need primer or a test area.What is the consumption or yield?
No separate consumption value is listed, so estimate from area, joint size, or recommendations for the specific application method.How long does the layer dry or form?
Let the layer fully form before loading. For difficult conditions, make a test area and check the instructions.What are the common mistakes?
Painting a weak base without primer, applying too thick a layer, wrong application temperature, and rushing between coats.