Unbreakable citadel universal paint for facades and interiors

Save to favorites

Add to compare

Unbreakable citadel universal paint for facades and interiors

Universal water-dispersion paint for facades and interiors, walls, ceilings, and prepared mineral substrates.

Specifications

Consumption:
0,14 kg/m²
Washability class:
Gloss level:
Matte, 3
Fungicidal protection:
Protection period:
12 years
Application area:
Outdoors and indoors
Safety:
Safe
Durability:
Aesthetic and mechanically resistant
Thinner:
Water
Hiding power class:
Application temperature:
+5°C ... +35°C

Choose a variant

4 available

Color: White
Packaging: 1.4 kg 4.2 kg 7 kg 14 kg

Paint calculator

Consumption: 0,14 kg/m²

Description

Unbreakable Citadel universal paint for facades and interiors is intended for decorative and protective painting of surfaces outdoors and indoors.

The paint is used for walls, ceilings, and facades on prepared mineral substrates, including concrete, brick, plaster, and similar materials. It suits work where a white matte coating with vapor permeability and resistance to operating loads is needed.

The product specifications state washability class 1, hiding power class 1, matte level 3, fungicidal protection, water thinning, and a 12-year protection period when the manufacturer’s recommendations are followed.

Before application, clean the surface from dust, dirt, unstable coatings, and poorly bonded particles. The substrate should be dry, strong, and level, and the application temperature should be within +5°C ... +35°C.

Mix the paint until homogeneous and thin with water if needed. Apply evenly, considering the substrate condition, application area, weather for facade work, and the recommended drying time between coats.

Benefits

  • suitable for exterior and interior work;

  • used for facades, walls, and ceilings;

  • forms a white matte coating for decorative finishing;

  • has washability class 1, hiding power class 1, and fungicidal protection;

  • the stated protection period is 12 years when the manufacturer’s recommendations are followed;

  • thins with water and is available in pack sizes for different work volumes.

Where to use

  • building facades and exterior walls;

  • walls and ceilings indoors;

  • prepared concrete, brick, and plastered surfaces;

  • other prepared mineral substrates;

  • repair or decorative renewal of facades and interiors;

  • areas where a matte coating with regular cleaning capability is needed.

How to choose a variant

  • 1.4 kg is convenient for a small area, repair, or trial painting;

  • 4.2 kg suits local repair, a single wall, or a small room;

  • 7 kg is useful for a medium amount of facade or interior work;

  • 14 kg is suitable for a larger area or a series of surfaces;

  • all variants are white, so check whether you need a ready white finish or further tinting;

  • for universal use, refer to outdoor and indoor application, washability class 1, and hiding power class 1.

How to apply

  • prepare a dry, strong, and level substrate without dust, dirt, or unstable coatings;

  • make sure the surface has no poorly bonded particles;

  • plan work at an application temperature of +5°C ... +35°C;

  • mix the paint until homogeneous before use;

  • thin with water if needed according to the manufacturer’s recommendations;

  • apply evenly, considering the substrate condition, application area, and recommended drying time between coats.

FAQ: use, consumption, and common mistakes

  • What is it suitable for?
    Universal water-dispersion paint for facades and interiors, walls, ceilings, and prepared mineral substrates.

  • When is it not suitable?
    Do not apply over dust, grease, moisture, chalky or weak coatings; difficult substrates need primer or a test area.

  • What is the consumption or yield?
    Product specification guide: 0,14 kg/m². For an exact estimate, consider area, joint size, application method, and substrate condition.

  • How long does the layer dry or form?
    Let the layer fully form before loading. For difficult conditions, make a test area and check the instructions.

  • What are the common mistakes?
    Painting a weak base without primer, applying too thick a layer, wrong application temperature, and rushing between coats.

Video
Reviews (0)

Similar products

1 similar products