Save to favorites
Add to compare
Mounting foam cleaner
Cleaner for fresh mounting foam and adhesive foam, applicator gun maintenance, aerosol can valves, tools, and contaminated surfaces.
Specifications
- Storage term:
- 18 months
- Base:
- mixture of organic solvents and propellants
- Application temperature:
- -10°C ... +35°C
Choose a variant
1 available
Mounting foam cleaner is intended for applicator gun maintenance and removal of fresh contamination after working with mounting foam or adhesive foam.
The product is used to clean the gun immediately after foam application, remove fresh residue from the aerosol can valve, tools, clothing, building surfaces, and work areas. It can also be used to degrease building surfaces when preparing for decorative finishing work.
The cleaner is based on a mixture of organic solvents and propellants and is used at -10°C ... +35°C. It is intended for fresh foam residue only: cured polyurethane foam is removed mechanically.
Before use, shake the can, remove the protective cap, and attach the spray nozzle. To clean external contamination, spray the cleaner in doses onto contaminated parts until fresh residue is removed. The working position of the can is upside down.
To flush the applicator gun, remove the spray nozzle, attach the gun to the cleaner can, press the trigger, and flush the internal cavity and nozzle. Leave the cleaner inside the gun for 2-3 minutes, then repeat flushing until the required result is achieved. Avoid contact with polystyrene foam products.
- helps clean the applicator gun after using mounting foam or adhesive foam;
- suitable for removing fresh foam residue from the can valve, tools, and work surfaces;
- can be used to degrease surfaces before finishing work;
- includes a spray nozzle for external cleaning;
- works in the -10°C ... +35°C temperature range;
- available in a transparent 500 ml variant.
- cleaning the applicator gun after foam work;
- removing fresh mounting foam and adhesive foam residue;
- cleaning the aerosol can valve before further use;
- maintaining tools and work areas;
- cleaning fresh contamination on building surfaces;
- degreasing surfaces before decorative finishing work.
- 500 ml is convenient for applicator gun maintenance and cleaning the work area after foam application;
- the transparent variant suits tasks where a visible product color is undesirable;
- choose the cleaner when fresh foam needs to be removed or the tool needs flushing;
- cured polyurethane foam requires mechanical removal.
- shake the can and attach the spray nozzle for external cleaning;
- spray the product onto fresh contamination or contaminated gun parts;
- to flush the gun, remove the nozzle and attach the applicator gun to the cleaner can;
- press the trigger and flush the internal cavity and nozzle;
- leave the cleaner inside the gun for 2-3 minutes and repeat flushing if needed;
- after work, disconnect the gun and put the protective cap on the can.
What is it suitable for?
Cleaner for fresh mounting foam and adhesive foam, applicator gun maintenance, aerosol can valves, tools, and contaminated surfaces.When is it not suitable?
Do not leave the formed PU joint exposed to UV; do not use it as a load-bearing structure or a replacement for proper fixing.What is the consumption or yield?
No separate consumption value is listed, so estimate from area, joint size, or recommendations for the specific application method.How long does the layer dry or form?
Let the layer fully form before loading. For difficult conditions, make a test area and check the instructions.What are the common mistakes?
Cold can, wrong working position, overfilling, missing moisture when instructions require it, and an unprotected joint in sunlight.