Acrylic adhesive “Supermontage”

Save to favorites

Compare

Acrylic adhesive “Supermontage”

One-component acrylic adhesive for exterior and interior repair and mounting work, fixing wood, coverings, ceramic, plasterboard, and polystyrene.

Specifications

Consumption:
0.25 - 0.5 kg/m²
Storage term:
18 months
Drying time:
24 - 48 hours
Operating temperature:
-40°C ... +80°C
Base:
copolymer-acrylate
Application temperature:
+5°C ... +35°C

Choose a variant

Color: White
Packaging: 0.4 kg

Consumption calculator

Acrylic adhesive “Supermontage” is designed for exterior and interior repair and mounting work when a construction or finishing element needs to be fixed to a traditional construction surface.

The copolymer-acrylate adhesive is used for wood and wood-based materials, laminate, parquet, linoleum, carpet, cork, facing tile, ceramic, gypsum, plasterboard, glass, polystyrene, and polyurethane. When working with smooth materials, the manufacturer’s condition should be considered: at least one contact surface must be porous.

Before application, surfaces must be dry, strong, level, and cleaned of dust, dirt, grease, old paint, loose particles, and other contaminants. Porous materials should be pre-treated with Lacrysil primer concentrate diluted 1:10 and dried.

Apply the adhesive in dots or strips to one contact surface, then press the parts firmly and evenly. Do not allow adhesive strips to merge while pressing the surfaces together.

Work should be carried out at +5°C ... +35°C. Drying time is 24-48 hours and depends on the substrate, adhesive amount, application method, and ambient conditions.

Benefits

  • suitable for repair and mounting work indoors and outdoors;
  • helps fix wood, laminate, parquet, linoleum, carpet, and cork;
  • compatible with ceramic, tile, gypsum, plasterboard, glass, and polystyrene;
  • applied in dots or strips to one contact surface;
  • suitable for tasks where at least one surface is porous;
  • the white 0.4 kg pack is convenient for local mounting and repair.

Where to use

  • bonding wood and wood-based materials;
  • installing laminate, parquet, linoleum, and carpet;
  • work with cork, facing tile, and ceramic;
  • fixing gypsum, plasterboard, polystyrene, and polyurethane;
  • combining with glass when a porous contact surface is present;
  • repair and mounting tasks on traditional construction substrates.

How to choose a variant

  • available variant: white adhesive in a 0.4 kg pack;
  • white color is appropriate when the joint is covered by the material or joint color is not critical;
  • the 0.4 kg pack suits small repair and mounting jobs;
  • before choosing, check material compatibility in the table below and the porous-surface condition.

How to use

  • prepare dry, strong, and level surfaces;
  • clean the substrate from dust, dirt, grease, old paint, and loose particles;
  • treat porous materials with Lacrysil primer concentrate diluted 1:10 and let them dry;
  • make sure at least one contact surface is porous;
  • apply the adhesive in dots or strips to one surface;
  • press the parts firmly and evenly without allowing adhesive strips to merge.

Compatibility table

Material / Base Concrete, brick Gypsum, plasterboard Stone, granite, marble Wood, chipboard, fiberboard, MDF, plywood Tile, ceramic, porcelain Primed metal Polystyrene
Concrete, brick, gypsum, plasterboard
Stone, granite, marble
Mirror, glass
Wood, chipboard, MDF, fiberboard, plywood
Tile, ceramic, porcelain
Primed metal
Plastic, PVC
Polystyrene

FAQ: use, consumption, and common mistakes

  • What is it suitable for?
    One-component acrylic adhesive for exterior and interior repair and mounting work, fixing wood, coverings, ceramic, plasterboard, and polystyrene.

  • When is it not suitable?
    Do not use as a replacement for mechanical fixing where the element manufacturer requires anchors or dowels; do not bond over dust, grease, or weak layers.

  • What is the consumption or yield?
    Product specification guide: 0.25 - 0.5 kg/m². For an exact estimate, consider area, joint size, application method, and substrate condition.

  • How long does the layer dry or form?
    Product specification guide: 24 - 48 hours. Cold, humidity, or a thick layer can increase the waiting time before loading.

  • What are the common mistakes?
    Weak substrate preparation, loading too early, uneven pressing, and choosing adhesive without considering element weight.

No videos have been added for this product yet.

Customer reviews

No reviews for the selected filter yet.

Write a review

Rating

Similar products

3 similar products

-15%
TOP
Acrylic adhesive “Liquid Nails”

Acrylic adhesive “Liquid Nails” · Transparent, 0.28 kg

Color:

Packaging:

0.28 kg

114.00 ₴

96.90 ₴