60 seconds professional adhesive foam

Save to favorites

Compare

Sale ends in

00 days
00 hrs
00 min
00 sec

60 seconds professional adhesive foam, Turquoise, 800 ml

Fast-fixing professional adhesive foam for installing thermal insulation boards, building structures, foam blocks, and aerated blocks with an applicator gun.

Specifications

Color:
Turquoise
Curing time:
5 - 30 minutes*
Full polymerization time:
12 - 48 hours*
Maximum joint depth:
30 mm
Storage term:
18 months
Tack-free time:
3 - 5 minutes*
Cylinder temperature:
+15°C ... +30°C
Secondary expansion:
100 - 150%*
Packaging:
800 ml
Base:
foamed polyurethane composition
Application temperature:
-5°C ... +35°C

Choose a variant

Color: Turquoise Turquoise
Packaging: 800 ml

Consumption calculator

Maximum joint depth: 30 mm

Selected variant Turquoise · 800 ml

284.78 ₴

Description

60 seconds professional adhesive foam is intended for fast professional installation of thermal insulation systems and building structures. It is used for fixing thermal insulation boards indoors and outdoors, thermal insulation of structures, fixing foam and aerated blocks, sealing joints, and installing materials in household and industrial work.

It is a one-component polyurethane adhesive foam for use with an applicator gun. The format is suitable where controlled application and quick initial positioning of elements are important without long waiting time.

Use the adhesive foam at -5°C ... +35°C and relative air humidity of at least 70%. Before use, keep the can at +15°C ... +30°C, shake thoroughly for at least 1 minute, and clean surfaces from dust, dirt, grease, ice, and frost. At positive temperatures, slightly moisten the substrate immediately before application.

The working position of the can is upside down. Apply adhesive foam to the board in 1-1.5 cm strips around the perimeter, 3-5 cm from the edge, then crosswise. Keep the layer in the air for about 1 minute, then press the element firmly and evenly to the substrate and fix it for 1-2 minutes.

Shake the can periodically during work. Cured adhesive foam should be protected from UV radiation by painting or plastering. Uncured adhesive foam can be removed from surfaces and the applicator gun with TM Lacrysil mounting foam cleaner, while cured material can only be removed mechanically.

Benefits

  • designed for fast professional installation of thermal insulation systems;
  • works with an applicator gun for controlled application;
  • suitable for fixing thermal insulation boards, foam blocks, and aerated blocks;
  • allows the element to be fixed in about 1-2 minutes after pressing;
  • can be used at -5°C ... +35°C;
  • available in an 800 ml turquoise variant.

Where to use

  • installation of thermal insulation systems;
  • fixing thermal insulation boards indoors and outdoors;
  • thermal insulation of building structures;
  • fixing foam and aerated blocks;
  • sealing joints;
  • joining and installing materials in household and industrial work.

How to choose a variant

  • 800 ml is appropriate for installing several boards or working across several areas;
  • the professional format is suitable when an applicator gun is used;
  • choose the 60 seconds variant when quick initial fixation of elements is important;
  • consider the turquoise color if the application area remains visible before finishing.

How to use

  • keep the can at +15°C ... +30°C and shake for at least 1 minute before use;
  • clean surfaces from dust, dirt, grease, ice, and frost;
  • at positive temperatures, slightly moisten the substrate before application;
  • apply adhesive foam to the board in perimeter strips 3-5 cm from the edge and then crosswise;
  • keep the layer in the air for about 1 minute, press to the substrate, and fix for 1-2 minutes;
  • after curing, protect the adhesive foam from UV radiation and remove uncured residue with TM Lacrysil cleaner.

FAQ: use, consumption, and common mistakes

  • What is it suitable for?
    Fast-fixing professional adhesive foam for installing thermal insulation boards, building structures, foam blocks, and aerated blocks with an applicator gun.

  • When is it not suitable?
    Do not leave the formed PU joint exposed to UV; do not use it as a load-bearing structure or a replacement for proper fixing.

  • What is the consumption or yield?
    No separate consumption value is listed, so estimate from area, joint size, or recommendations for the specific application method.

  • How long does the layer dry or form?
    Product specification guide: 5 - 30 minutes*. Cold, humidity, or a thick layer can increase the waiting time before loading.

  • What are the common mistakes?
    Cold can, wrong working position, overfilling, missing moisture when instructions require it, and an unprotected joint in sunlight.

Video
Reviews (0)

Similar products

2 similar products