TOP
Save to favorites
Add to compare
MS Polymer adhesive “Super Fix”
Mounting adhesive based on hybrid MS polymer for strong fixing of heavy construction and decorative finishing elements indoors and outdoors.
Specifications
- Consumption:
- 15 linear m (5x5 mm seam)
- Storage term:
- 12 months
- Drying time:
- 24 - 48 hours
- Operating temperature:
- -40°C ... +100°C
- Base:
- hybrid MS polymer
- Application temperature:
- +5°C ... +40°C
Choose a variant
1 available
Description
Video
Reviews (0)
MS Polymer “Super Fix” adhesive is designed for installing heavy construction and decorative finishing elements when a strong bond without visible mechanical fixing is required.
The hybrid MS polymer adhesive is suitable for interior and exterior work, helps bond structures made from most traditional construction materials, and keeps seam performance in the range of -40°C ... +100°C.
The product can be used on concrete, brick, gypsum, plasterboard, stone, granite, marble, glass, mirror, wood, chipboard, fiberboard, MDF, plywood, tile, ceramic, porcelain, metals, plastic, polystyrene, aluminum, copper, and their alloys. The compatibility table below helps check materials before installation.
Before application, working surfaces must be strong, level, and cleaned of dust, dirt, mould, grease stains, and particles that are poorly bonded to the substrate. Before starting work, moderately moisten the contact surfaces and make sure the product and ambient temperature are within +5°C ... +40°C.
When used as a mounting adhesive, apply the product in strips or spots to one contact surface, then press the elements firmly and evenly and fix them in place. Do not apply the adhesive as a continuous layer or allow strips to merge during pressing. Final seam formation takes 24-48 hours and depends on materials, layer thickness, and ambient conditions.
Benefits
- suitable for installing heavy construction and decorative elements;
- can be used for interior and exterior work;
- adheres to a wide range of construction substrates;
- keeps seam properties in the range of -40°C ... +100°C;
- approximate consumption is 15 linear m for a 5x5 mm seam;
- helps create a neat bond without visible mechanical fastening.
Where to use
- installation of heavy construction elements;
- fixing decorative finishing elements;
- work on concrete, brick, gypsum, and plasterboard;
- installation of stone, granite, marble, tile, ceramic, and porcelain;
- bonding wood, chipboard, fiberboard, MDF, and plywood;
- work with glass, mirror, metal, plastic, polystyrene, aluminum, and copper;
- roofing and exterior elements made of tile roofing, slate, and tinplate.
How to use
- clean the substrate of dust, dirt, mould, grease stains, and unstable particles;
- moderately moisten contact surfaces before application;
- make sure product and ambient temperature is within +5°C ... +40°C;
- apply the adhesive in strips or spots to one surface;
- press the elements firmly and fix them until setting;
- avoid a continuous layer and strip merging during pressing.
Limitations
- do not use for permanent immersion in water;
- do not apply as a continuous layer when used as a mounting adhesive;
- follow the recommended application temperature of +5°C ... +40°C;
- final seam formation time of 24-48 hours depends on materials, layer thickness, and ambient conditions.
Compatibility table
| Material / Base | Concrete, brick, gypsum, plasterboard | Stone, granite, marble | Mirror, glass | Wood, chipboard, fiberboard, MDF, plywood | Tile, ceramic, porcelain | Ferrous and galvanized metal, stainless steel | Plastic | Polystyrene | Aluminum, copper and their alloys |
|---|---|---|---|---|---|---|---|---|---|
| Concrete, brick, gypsum, plasterboard | |||||||||
| Stone, granite, marble | |||||||||
| Mirror, glass | |||||||||
| Wood, chipboard, MDF, fiberboard, plywood | |||||||||
| Tile, ceramic, porcelain | |||||||||
| Ferrous and galvanized metal, stainless steel | |||||||||
| Plastic | |||||||||
| Polystyrene | |||||||||
| Aluminum, copper and their alloys | |||||||||
| Tile roofing, slate, tinplate |
FAQ: use, consumption, and common mistakes
What is it suitable for?
Mounting adhesive based on hybrid MS polymer for strong fixing of heavy construction and decorative finishing elements indoors and outdoors.When is it not suitable?
Do not use as a replacement for mechanical fixing where the element manufacturer requires anchors or dowels; do not bond over dust, grease, or weak layers.What is the consumption or yield?
Product specification guide: 15 linear m (5x5 mm seam). For an exact estimate, consider area, joint size, application method, and substrate condition.How long does the layer dry or form?
Product specification guide: 24 - 48 hours. Cold, humidity, or a thick layer can increase the waiting time before loading.What are the common mistakes?
Weak substrate preparation, loading too early, uneven pressing, and choosing adhesive without considering element weight.
Similar products
1 similar products