Acrylic adhesive “Multi-Green”

Save to favorites

Add to compare

Acrylic adhesive “Multi-Green”

Ready-to-use green acrylic adhesive for installing artificial grass carpet, carpet, vinyl, PVC, and other compatible coverings on mineral and wooden substrates.

Specifications

Consumption:
0.7 - 0.8 kg/m²
Storage term:
18 months
Drying time:
24 - 48 hours
Operating temperature:
-40°C ... +80°C
Base:
copolymer-acrylate
Application temperature:
+10°C ... +35°C

Choose a variant

4 available

Color: Green
Packaging: 1.5 kg 3 kg 6 kg 15 kg
Description

Acrylic adhesive “Multi-Green” is designed for installing artificial grass carpet when arranging artificial lawns, as well as for interior and exterior decorative finishing work with coverings.

The ready-to-use one-component adhesive fixes woven and nonwoven-based materials to mineral surfaces such as concrete, cement-sand, brick, and stone, as well as to wooden substrates including boards, plywood, fiberboard, and OSB.

Before application, working surfaces must be strong, dry, and cleaned of dust, dirt, old paint, grease stains, other contaminants, and poorly bonded layers. Porous materials and surfaces with signs of crumbling should be pre-treated with Lacrysil primer concentrate diluted 1:10 and dried.

Stir the adhesive thoroughly in its packaging until uniform, apply a sufficient amount to the working surface with a notched trowel, and keep it open for 10-15 minutes. Then press the covering firmly and evenly into the adhesive layer and compact the seam carefully.

After 20-30 minutes, compact again, remove excess adhesive with cloth or sponge, and fix the edges of the bonded materials until the seam is fully formed. Work should be carried out at substrate and ambient temperature of +10°C ... +35°C and relative humidity not exceeding 60%. Optimal application conditions are 20±2°C and 50% air humidity.

Final adhesive seam formation takes 48-72 hours and depends on ambient conditions. Avoid contact of the seam with moisture during formation. The covering should be held for 72 hours before use; under unfavorable conditions or between dense surfaces with limited absorption, this time may increase.

Benefits
  • made for installing artificial grass carpet;
  • suitable for arranging artificial lawns;
  • used for carpet, vinyl, PVC, and other compatible coverings;
  • works with mineral, wooden, woven, and nonwoven substrates according to the table;
  • applied with a notched trowel after stirring until uniform;
  • available in green 1.5 kg, 3 kg, 6 kg, and 15 kg pack sizes.
Where to use
  • installing artificial grass carpet;
  • arranging artificial lawns;
  • fixing carpet coverings;
  • working with vinyl and PVC coverings;
  • installing coverings on concrete, brick, gypsum, plasterboard, stone, wood, chipboard, fiberboard, MDF, and plywood;
  • interior and exterior decorative finishing work.
How to choose a variant
  • 1.5 kg is convenient for local repair or a small covering area;
  • 3 kg suits medium-sized work with carpet or vinyl covering;
  • 6 kg is useful for a larger area or several installation zones;
  • 15 kg is appropriate for large-scale artificial grass or covering installation.
How to use
  • prepare a strong, dry, and clean substrate without dust, grease, old paint, or weak layers;
  • treat porous or crumbling surfaces with Lacrysil primer concentrate diluted 1:10 and let them dry;
  • stir the adhesive in its packaging until uniform;
  • apply enough adhesive with a notched trowel and keep it open for 10-15 minutes;
  • press the covering into the adhesive layer, compact the seam, and compact again after 20-30 minutes;
  • fix the edges until the seam forms, avoid moisture during drying, and wait 72 hours before using the covering.
Compatibility table
Material / Base Concrete, brick Gypsum, plasterboard Stone, granite, marble Wood, chipboard, fiberboard, MDF, plywood Nonwoven materials
Artificial grass carpet
Linoleum, parquet, laminate -
PVC coverings
Vinyl coverings
Carpet coverings
Wood, chipboard, fiberboard, MDF
FAQ: use, consumption, and common mistakes

  • What is it suitable for?
    Ready-to-use green acrylic adhesive for installing artificial grass carpet, carpet, vinyl, PVC, and other compatible coverings on mineral and wooden substrates.

  • When is it not suitable?
    Do not use as a replacement for mechanical fixing where the element manufacturer requires anchors or dowels; do not bond over dust, grease, or weak layers.

  • What is the consumption or yield?
    Product specification guide: 0.7 - 0.8 kg/m². For an exact estimate, consider area, joint size, application method, and substrate condition.

  • How long does the layer dry or form?
    Product specification guide: 24 - 48 hours. Cold, humidity, or a thick layer can increase the waiting time before loading.

  • What are the common mistakes?
    Weak substrate preparation, loading too early, uneven pressing, and choosing adhesive without considering element weight.

Video
Reviews (0)

Similar products

3 similar products