Quick answer: LACRYSIL professional 60 Seconds foam adhesive is applied with a gun at -10°C ... +35°C, the household 60 Seconds version from -5°C. The professional 60 Seconds card gives a tack-free time of 3-5 minutes, so do not move the pressed element until the foam has set. The household tube version works from -10°C, the professional gun version without the 60 Seconds label only from +10°C. The household tube, professional and professional 60 Seconds cards list fixing foam and aerated blocks, but not as a load-bearing structure or a replacement for fastening.
Contents
Problem this material solves
Foam or aerated blocks need fixing in cold weather, and the foam adhesive is expected to behave as it does in summer.
Who it suits and where to use it
Choose by task, substrate, and operating conditions, not only by product name.
- insulation boards and panels on facades and foundations
- foam and aerated blocks
- work with an applicator gun
Suitable | Not suitable / be careful |
|---|---|
insulation boards and panels on facades and foundations | dirty, greasy, icy, or wet substrates |
foam and aerated blocks | leaving cured foam unprotected from UV |
work with an applicator gun | load-bearing masonry or replacing fastening required by the design |
How to prepare the substrate
Clean surfaces from dust, grease, ice, and buildup. Application temperature for this product: -10°C ... +35°C; condition the can according to the product data.
How to apply step by step
Follow this order to avoid the usual mistakes:
- Shake the can well and attach it to the gun.
- Apply a 1-1.5 cm strip around the board perimeter, 3-5 cm from the edge.
- Add crosswise strips.
- Let the layer stand in air for as long as the instructions on the can say.
- Press the board to the substrate and do not move it until the foam sets: the card gives a tack-free time of 3-5 minutes.
Fixing aerated blocks in the cold
The application temperature on the product card decides what to use in the cold. Professional 60 Seconds and the household tube version are applied from -10°C, household 60 Seconds from -5°C, and the professional gun version without the 60 Seconds label only from +10°C. The can must be warm in any case: all three foam adhesive cards give a can temperature of +15°C ... +30°C, so keep it in a heated room until you start. More on working in frost: Expanding foam in winter.
- clean dust, ice, and frost from the blocks and moisten the substrate only at positive temperatures
- keep a spare can warm and swap out a can that has cooled down
- foam adhesive fixes foam and aerated blocks, but it is not a load-bearing structure and does not replace fastening required by the design
- cover cured foam in the joints with plaster or paint to protect it from UV
Database-backed specifications and variants
Data from LACRYSIL product cards and available packs:
Attribute | 60 seconds professional adhesive foam | Household polyurethane adhesive foam |
|---|---|---|
Storage term | 18 months | 18 months |
Application temperature | -10°C ... +35°C | -10°C ... +35°C |
Cylinder temperature | +15°C ... +30°C | +15°C ... +30°C |
Full polymerization time | 12 - 48 hours* | 12 - 48 hours* |
Base | foamed polyurethane composition | foamed polyurethane composition |
Secondary expansion | 100 - 150%* | 150 - 250% |
Tack-free time | 3 - 5 minutes* | 5 - 30 minutes** |
Curing time | 5 - 30 minutes* | 0.5 - 6 hours |
Task | Bond EPS/XPS insulation; Bond foam plastic; Bond aerated or foam concrete blocks | Bond EPS/XPS insulation; Bond foam plastic; Bond aerated or foam concrete blocks |
Application method | Bonding a board 1000×1000, Ø30 mm envelope; Joint sealing | Bonding a board 1000×1000, Ø30 mm envelope; Joint sealing |
Maximum joint depth | 30 mm | 30 mm |
Active variants from the database
Product | SKU | Variant |
|---|---|---|
60 seconds professional adhesive foam | LA-6SZ-TQA | Color: Turquoise; Packaging: 800 ml; Density: 20 kg/m³; Net weight: 0.715 kg |
Household polyurethane adhesive foam | LA-HPT-NRA | Color: Orange; Packaging: 800 ml; Density: 30 kg/m³; Net weight: 0.615 kg |
Professional polyurethane adhesive foam | LA-PPV-NRA | Color: Orange; Packaging: 800 ml; Density: 20 kg/m³; Net weight: 0.715 kg |
Mounting foam cleaner | LA-CXY-TRA | Color: Transparent; Packaging: 500 ml; Density: 800 kg/m³; Net weight: 0.295 kg |
Choose a pack size: 60 seconds professional adhesive foam
Common mistakes
These mistakes often ruin the result before the material can perform.
Mistake | How to avoid it |
|---|---|
The layer did not stand in air. | Let it stand as long as the can instructions say. |
The substrate was dusty or greasy. | Clean and slightly moisten it at positive temperatures. |
The element was not fixed after pressing. | Do not move the element until the foam sets (3-5 minutes for 60 Seconds). |
The cured layer was left exposed to sunlight. | Protect it with paint or plaster. |
Why LACRYSIL fits this task
For this scenario, the main product is 60 seconds professional adhesive foam because:
- the product card describes insulation, panel, foam block, and aerated block installation
- the data includes application temperature, curing time, and secondary expansion
- fresh residues can be removed with LACRYSIL mounting foam cleaner
What to view in the catalog
Products, the catalog section, and a related article on this topic:
- 60 seconds professional adhesive foam
- Household polyurethane adhesive foam
- Professional polyurethane adhesive foam
- Mounting foam cleaner
- open the catalog category
- related blog article
FAQ
How long does it dry?
The product card states: 12 - 48 hours*. Actual time depends on layer, substrate, and conditions.
What is the consumption or yield?
No separate consumption value is listed, so no invented figure is added.
Can it be used outdoors?
Yes. The product is described for indoor and outdoor work when conditions match the application temperature.
Can it be used in humid rooms?
Adhesive foam is not a final waterproofing layer. After curing, protect it from UV and open exposure.
Is primer needed?
A separate primer is not required in the product data, but cleaning and slight moistening at positive temperatures are important.
At what temperature should it be applied?
The professional 60 Seconds data gives an application temperature of -10°C ... +35°C. Household 60 Seconds is applied from -5°C, the professional foam adhesive without the 60 Seconds label from +10°C.
Fact check: This material is based on LACRYSIL product cards; unverified specifications were not added.
Ready to view the product? open the catalog card
